THE SG2

The SG2 is a tried and tested formula that we are reluctant to "fiddle" with too much. Proven in its reliability, the kiln is capable of surprisingly large quantities of work in relation to its size, this is thanks to its stainless steel rack and 4 shelves each of 380 x 330. This allows for a much larger amount of stained glass work to be fired at a time than in your usual plug in kiln.

One change, however, is that the SG2 now uses the KCR32C which brings it inline with the majority of our other kilns. This has required a full reworking of the kilns internal wiring and many components. These changes mean that the SG2 can now take full advantage of the Kilncare Gateway WIFI option which opens up a whole new way of kiln use.

The KCR32C is multi-program controller designed for glass, ceramics & pottery use. It is targeted towards glass use with 32 programs each of up to 32 segments. Each segment is a controlled heating/cooling ramp followed by a soak. It is supplied pre-programmed with 9 typical glass programs and 9 typical ceramics programs (which can be over-written).

The slow rate capability of the KCR32C, down to 1c per hour, makes it the perfect controller for complicated glass cycles.

KCR32C Controller features:

32 programs - each with up to 32 segments.
Each segment is a controlled heating/cooling ramp soak.
Suitable for glass or ceramics use.
Soak times up to nearly 100 hours.
Ramp rates from 1 to 999°C/hour full.
Program Pause & Segment Advance facilities.
Can be held remotely, allowing for an easy and comfortable programming process.

Keyboard lockable.
Delayed start facility - up to 4 days.
Power failure recovery.
Energy used display.
Event / Damper / Fan relay output.
Alarm relay with alarm buzzer.
Mains power switch.
Built in the United Kingdom.

KCR32C WIFI Controller (Optional)

The KCR32CWIFi is internally the same as the KCR32C but has the capability to be accessed

and controlled remotely from your mobile device.

This is one of the most important advances in Kilncare kilns for many years.

Using Kilncares GATEway access site you can view how your kiln is running in real time. Stop the

firing or adjust programs all without even being in the same country let alone the same room.

The KCR32WIFI is also fitted with a USB port that allows programs to be entered that way direct from PC if required and also allows us to apply updates and run diagnostics without travelling to your kiln.

Internet access to view real time status and access data

The optional KCR32C WIFI allows the user to access the kiln in real time from anywhere with internet access via the Kilncare GATEway on our website. The benefits of this are obvious as there is no longer the need to travel to the studio or work place to see how the firing is proceeding or if indeed the firing is going as planned.

Also in the GATEway, which is unique to each user via password access, there is a firings library where past firings can be stored and named, a notes section and a log amongst other features.

13A Plug-in Supply

The SG2 comes with a standard 13A plug and lead, allowing for you to simply plug it into the wall and get firing without having to worry about getting the kiln hardwired in! This also makes relocation a lot easier as you will just need to make sure that wherever it is going to has a socket.

Removable rack

The internal stainless steel shelves and rack can be removed leaving a standard usable kiln chamber! However, when inside the kiln the 4 shelves (each of 380 x 330) allows for a much larger amount of stained glass work to be fired at a time than in your usual plug in kiln.

Ultra safe elements

Safety is a main priority of ours so heat is provided from ultra-safe Mineral Insulated elements around the sides.

Fast Response Thermocouple.

The KCR32C gets its data from an ultra-fast response, stainless steel thermocouple meaning no lag between the kiln temperature and the KCR32Cs control.
The fact that the thermocouple is stainless steel means it is also resilient to accidental damage.

Non ceramic fiber door and light weight chamber

The door is made of non ceramic fiber, which not only is a high quality insulator, but also provides an excellent seal connection with the chamber bricks when closed. The kiln chambers are built with high quality, light weight insulation bricks making the kiln extremely efficient.
.

Robust and resilient frame

The door is made of stainless steel while the rest of the frame is made from a rust resistant metal, powder coated in our Ultramarine blue, and then oven baked.

Optional SG2 Stand

The SG2 stand has two shelves, one for the kiln to sit on and one for your own use. It raises the kiln by 650mm to a comfortable height.
It is made of steel and is powder coated in our Ultra-marine blue.
The stand is supplied ready flat pack and for assembly.

Optional Wi-Fi capability

Also in the GATEway, which is unique to each user via password access, there is a firings library where past firings can be stored and named, a notes section and a log amongst other features.

3 Year Warranty

The SG2 comes with a 3 year warranty that applies for all parts (inc elements)! The fact that we are able to offer such a long warranty on these kilns just goes to show how well made they are and how they are truly built to last.

Made In The UK

The SG2, along with all other Kilncare kilns, is made right here at Kilncare, in Stoke-on-Trent, United Kingdom.

Unrivalled aftercare

Here at Kilncare we really do pride ourselves on our customer service. We have a team of kiln experts at hand that will be there for you whenever you find yourself with any queries or worries who will do their absolute best to ensure that you can continue your glass journey as problem free as possible.

We really do go the extra mile when it comes to customer service, which you can see for yourself by taking a quick look at our online reviews.

MENU

THE SG2