THE KC-T55 RANGE
Kilns in our KC-T55 range are made here in Stoke on Trent using traditional, time tested methods and techniques.
The kilns are made using the highest quality bricks and backing boards as efficiency is becoming more of an issue these days.
As with all of our kilns, function and durability take priority.
From top quality insulation, to top quality elements, to a controller that enables highly complex firings and Wi-Fi capability, this really is a seriously effective range of kilns.
​
Moreover, separating this range from the KC55 range is, of course, the trolley-style floors, allowing complete access to the base when loading.
​
KC-T55/60 ​
Internal size 460mm (wide) x 580mm (deep) x 750mm (High)
External Size 810mm (wide) x 1000mm (deep) x 1700mm (High)
Capacity 199Lts
Weight 590kg
Power 12KW (you should check that your power supply is suitable, and should be installed by a qualified electrician)
Amps 42/50A
Voltage 230/400v
Maximum Temperature 1315c
Controller included KCR32CWIFI
​
Picture excludes rail extensions and trolley floor
KC-T55/100 ​
Internal size 460mm (wide) x 670mm (deep) x 980mm (High)
External Size 820mm (wide) x 1160mm (deep) x 1780mm (High)
Capacity 300Lts
Weight 650kg
Power 16KW (you should check that your power supply is suitable, and should be installed by a qualified electrician)
Amps 67.2A
Voltage 400v
Maximum Temperature 1315c
Controller included KCR32CWIFI
​
Picture excludes rail extensions and trolley floor
KC-T55/150 ​
Internal size 610mm (wide) x 760mm (deep) x 910mm (High)
External Size 970mm (wide) x 1180mm (deep) x 1780mm (High)
Capacity 424Lts
Weight 910kg
Power 21.5KW (you should check that your power supply is suitable, and should be installed by a qualified electrician)
Amps 90.3A
Voltage 400v
Maximum Temperature 1315c
Controller included KCR32CWIFI
​
Picture excludes rail extensions and trolley floor
KC-T55/180 ​
Internal size 610mm (wide) x 910mm (deep) x 910mm (High)
External Size 970mm (wide) x 1490mm (deep) x 1780mm (High)
Capacity 510Lts
Weight 990kg
Power 25.5KW (you should check that your power supply is suitable, and should be installed by a qualified electrician)
Amps 107A
Voltage 400v
Maximum Temperature 1315c
Controller included KCR32CWIFI
Picture excludes rail extensions and trolley floor
KC-T55/250 ​
Internal size 670mm (wide) x 910mm (deep) x 1140mm (High)
External Size 1040mm (wide) x 1490mm (deep) x 1950mm (High)
Capacity 710Lts
Weight 1150kg
Power 32KW (you should check that your power supply is suitable, and should be installed by a qualified electrician)
Amps 134.4A
Voltage 400v
Maximum Temperature 1315c
Controller included KCR32CWIFI
​
Picture excludes rail extensions and trolley floor
Still not big enough?
Please contact us an with your requirements and we will do our best to meet your needs.
The KCR32CWIFI is multi-program controller designed for glass, ceramics & pottery use. It is targeted towards glass use with 32 programs each of up to 32 segments. Each segment is a controlled heating/cooling ramp followed by a soak. It is supplied pre-programmed with 9 typical glass programs and 9 typical ceramics programs (which can be over-written).
The slow rate capability of the KCR32C, down to 1c per hour, makes it the perfect controller for complicated glass cycles.
KCR32CWIFI Controller features:
​
-
32 programs - each with up to 32 segments.
-
Each segment is a controlled heating/cooling ramp soak.
-
Suitable for glass or ceramics use.
-
Soak times up to nearly 100 hours.
-
Ramp rates from 1 to 999°C/hour full.
-
Program Pause & Segment Advance facilities.
-
Can be held remotely, allowing for an easy and comfortable programming process.
-
Keyboard lockable.
-
Delayed start facility - up to 4 days.
-
Power failure recovery.
-
Energy used display.
-
Event / Damper / Fan relay output.
-
Alarm relay with alarm buzzer.
-
WIFI capability
-
Mains power switch.
-
Built in the United Kingdom.
WIFI Capability
​
The KCR32CWIFi is internally the same as the KCR32C but has the capability to be accessed
and controlled remotely from your mobile device.
This is one of the most important advances in Kilncare kilns for many years.
Using Kilncares GATEway access site you can view how your kiln is running in real time. Stop the
firing or adjust programs all without even being in the same country let alone the same room.
The KCR32WIFI is also fitted with a USB port that allows programs to be entered that way direct from PC if required and also allows us to apply updates and run diagnostics without travelling to your kiln.
Internet access to view real time status and access data
​
The optional KCR32C WIFI allows the user to access the kiln in real time from anywhere with internet access via the Kilncare GATEway on our website. The benefits of this are obvious as there is no longer the need to travel to the studio or work place to see how the firing is proceeding or if indeed the firing is going as planned.
Also in the GATEway, which is unique to each user via password access, there is a firings library where past firings can be stored and named, a notes section and a log amongst other features.
​
ST535CWIFI controller (optional)
​
The ST535WIFI is a multi-zone controller designed for use on our larger kilns where total evenness of chamber temperature is much more difficult to maintain through simple kiln design alone. The controller monitors one section of the kiln and adjusts the other sections to maintain perfect chamber uniformity with regards to temperature.
​
The ST535WIFI can set as low as 0.1c per hour.
​
The rest of the ST535WIFI is as the KCR32CWIFI.
ST535CWIFI Controller features
​
-
Multi-zone control.
-
32 programs - each with up to 32 segments.
-
Each segment is a controlled heating/cooling ramp soak.
-
Suitable for glass or ceramics use.
-
Soak times up to nearly 100 hours.
-
Ramp rates from 1 to 999°C/hour full.
-
Program Pause & Segment Advance facilities.
-
Keypad lockable.
Wi-Fi capability
​
The KCR32C WIFI allows the user to access the kiln in real time from anywhere with internet access via the Kilncare GATEway on our website. The benefits of this are obvious as there is no longer the need to travel to the studio or work place to see how the firing is proceeding or if indeed the firing is going as planned.
Also in the GATEway, which is unique to each user via password access, there is a firings library where past firings can be stored and named, a notes section and a log amongst other features.
​
Roll out trolley floor
​
The floor of KC-T55 kilns is a trolley mounted on heavy duty steel castors that run on a rail system.
This gives full access to the kiln floor which helps with loading.
The space inbetween the rails is covered with walk plate to reduce the risk of accidents when inserting and removing the truck from the kiln.
The trolley matches to the kiln with three levels of seal formation ensuring that the chamber heat is not effected in anyway.
​
​Kanthal A1 elements
The KC-T55 range, along with the vast majority of Kilncare kilns, utilizes Kanthal A1 elements (which are widely regarded as the best quality elements available), ensuring unbeatable reliability and durability.
Highly reliable three section seal
This massively improves heat retention.
The first section of the door seal on our new models is a machined insert in the brick lid that puts a brake on the heat before it reaches the second section, a traditional brick on brick contact.
The third step is maintained by non-ceramic fibre that is set into a channel around the front face, which ensures it stays in place, unlike other methods of "Stick on" fibre seals which often tend to fall off.
Robust front face
The Front Face itself is made from "Hard" insulation bricks to reduce the damage caused by knocks and bumps during loading.
All of the kiln doors in the KC-T55 range are made of the same high grade insulation bricks as the chamber sides.
​
Arched roof (models KC55/114 and above)
Once you reach the 114 model, each KC55 kiln will have an arched roof, providing that extra strength needed to keep a robust interior.
Permanent Seal Door Clamps
​
The actual sealing of the door is automatically adjusted every time the door is closed with the variable door clamps.
​Over-fire and door switch safety
Each KC-T55 has a door safety cut off switch along with a contactor door cut off circuit, which also acts as an over fire protection circuit. As well as this, there is also an extra control contactor, which in combination with the over fire contactor and door safety switch makes the kiln extremely safe.
Lockable Door Vent Hole
​
The door vent hole has a lockable swing plate that locks in the bung not allowing the bung to be taken out whilst it is at temperature.
This feature is a favourite of education establishments.
​
​
Manually operated roof vents or optional automatic vents
​
The roof vent is operated by a manual stainless steel damper box, automatic dampers are optional, and can be fitted to all KC-T55 kilns.
​
This allows the roof vents to be opened and closed multiple times throughout the duration of the firing at the temperatures required.
The opening and closing cycle is programmed into the controller which enables the user to start the kiln then not have to return to it for any action other than monitoring until the cycle is finished. Extremely useful on larger models where firings can last for much longer.
Optional multi zone​
The optional ST535WIFI is a multi-zone controller designed for use on our larger kilns where total evenness of chamber temperature is much more difficult to maintain through simple kiln design alone. The controller monitors one section of the kiln and adjusts the other sections to maintain perfect chamber uniformity with regards to temperature.
​
​
Optional restricted access split frame
​
The KC-T55 range can be specially built to be split into manageable sections if the kiln delivery includes stairs or very narrow access.
This option must be made at the point of order.