top of page



ST535WIFI Features

  • Multi-zone control.

  • 32 programs - each with up to 32 segments.

  • Each segment is a controlled heating/cooling ramp soak.

  • Suitable for glass or ceramics use.

  • Soak times up to nearly 100 hours.

  • Ramp rates from 0.1 to 999°C/hour full.

  • Program Pause & Segment Advance facilities.

  • Keypad lockable.

  • Delayed start - up to 4 days.

  • Internet access to kiln status and programs, real time monitoring from any device, anywhere with internet access via the Kilncare GATEway.

  • USB facility for fault logging and program loading.

  • Power failure recovery.

  • Energy used display.

  • Event / Damper / Fan relay output.

  • Alarm relay with alarm buzzer.

  • Mains power switch.

  • Built in the United Kingdom.

The ST535WIFI is a multi-zone controller designed for use on our larger kilns where total eveness of chamber temperature is much more difficult to maintain through simple kiln design alone. The controller monitors one section of the kiln and adjust the other sections to maintain perfect chamber uniformity with regards to temperature.

This multi-program controller is designed for glass, ceramics & pottery use. It is targeted towards glass use with 32 programs each of up to 32 segments. Each segment is a controlled heating/cooling ramp followed by a soak. It is supplied pre-programmed with 9 typical glass programs and 9 typical ceramics programs (which can be over-written).

The slow rate capability of the ST535WIFI, down to 0,1c per hour, makes it the perfect controller for complicated glass cycles.

The ST535WIFI has the capability to be accessed and controlled remotely from your mobile device.

This is one of the most important advances in Kilncare kilns for many years.

Using Kilncares GATEway access site you can view how your kiln is running in real time. Stop the firing or adjust programs all without even being in the same country let alone the same room.


The ST535WIFI is also fitted with a USB port that allows programs to be entered that way direct from PC if required and also allows us to apply updates and run diagnostics without travelling to your kiln.

The Kilncare GATEWay

gateway 1.jpg

The driving force behind the ST535CWIFI is the Kilncare GATEway which is the online access tool to the controller.

Once registered for the GATEway you have a host of invaluable tools to use with your ST535CWIFI without actually being with the controller....or even in the same country..

The tools include

  • See the kilns temperature and status real time.

  • Review the program that the kiln is firing at the time.

  • View all programs installed into the controller.

  • Create and name new programs and send them into the controller.

  • View all programs in graph form.

  • Stop the kiln if required.

  • Monitor for kiln fault alerts.

  • Monitor and use multiple kilns and ST535CWIFI controllers from the one registration.

  • Name each kiln and controller.

Real time status of the kiln as it fires.

gateway 4.jpg

I'm a paragraph. Click here to add your own text and edit me. It's easy.

gateway 2.jpg

View all programs in easy to read graph form.


Keep a library on all of your firings on multiple kilns.

gateway 3.jpg

Support Downloads

ST535WIFI Instruction Manual

GATEway Instruction Manual

bottom of page