THE TLA RANGE
The TLA Range are top loading glass casting kilns built with a longer life in mind.
The TLA has become popular with many top quality glass casting artists and establishments due to the extreme smoothness and evenness of the firing cycle that they produce making them perfect for casting thick work.
​
From top quality insulation, to top quality elements, to a controller that enables highly complex firings and Wi-Fi capability, to it's optional extras (like automatic dampers) this really is a seriously effective range of kilns.
TLA45
Internal size 470mm (wide) x 470mm (deep) x 570mm (High)
Capacity 128lts
Power 7.25KW
(you should check that your power supply is suitable,
and should be installed by a qualified electrician)
Amps 31A
Voltage 230v/400v+N
Maximum Temperature 1050c
Controller included KCR32CWIFI
TLA65
Internal size 500mm (wide) x 500mm (deep) x 680mm (High)
Capacity 158lts
Weight 287kg
Power 10KW
(you should check that your power supply is suitable,
and should be installed by a qualified electrician)
Amps 42A
Voltage 230v/400v+N
Maximum Temperature 1050c
Controller included KCR32CWIFI
​
​
TLA72
Internal size 890mm (wide) x 450mm (deep) x 500mm (High)
Capacity 204lts
Weight 313kg
Power 10.5KW/12KW
(you should check that your power supply is suitable,
and should be installed by a qualified electrician)
Amps 44A/50A
Voltage 230v/400v+N
Maximum Temperature 1050c
Controller included KCR32CWIFI
TLA85
Internal size 580mm (wide) x 580mm (deep) x 680mm (High)
Capacity 234lts
Power 12KW
(you should check that your power supply is suitable,
and should be installed by a qualified electrician)
Amps 50A
Voltage 230v/400v+N
Maximum Temperature 1050c
Controller included KCR32CWIFI
TLA99
Internal size 680mm (wide) x 500mm (deep) x 820mm (High)
Capacity 284lts
Weight 90kg
Power 13.5KW
(you should check that your power supply is suitable,
and should be installed by a qualified electrician)
Amps 56.7A
Voltage 230v/400v+N
Maximum Temperature 1050c
Controller included KCR32CWIFI
TLA132
Internal size 910mm (wide) x 500mm (deep) x 820mm (High)
Capacity 375lts
Weight 446g
Power 15KW
(you should check that your power supply is suitable,
and should be installed by a qualified electrician)
Amps 63A
Voltage 230v/400v+N
Maximum Temperature 1050c
Controller included KCR32CWIFI
TLA150
Internal size 810mm (wide) x 760mm (deep) x 680mm (High)
Capacity 462lts
Power 17.5KW
(you should check that your power supply is suitable,
and should be installed by a qualified electrician)
Amps 73.5A
Voltage 400v+N
Maximum Temperature 1050c
Controller included KCR32CWIFI
TLA180
Internal size 1220mm (wide) x 610mm (deep) x 680mm (High)
Capacity 511lts
Power 21.5KW
(you should check that your power supply is suitable,
and should be installed by a qualified electrician)
Amps 90.3A
Voltage 400v+N
Maximum Temperature 1050c
Controller included KCR32CWIFI
The KCR32C is multi-program controller designed for glass, ceramics & pottery use. It is targeted towards glass use with 32 programs each of up to 32 segments. Each segment is a controlled heating/cooling ramp followed by a soak. It is supplied pre-programmed with 9 typical glass programs and 9 typical ceramics programs (which can be over-written).
The slow rate capability of the KCR32C, down to 1c per hour, makes it the perfect controller for complicated glass cycles.
KCR32C Controller features:
​
-
32 programs - each with up to 32 segments.
-
Each segment is a controlled heating/cooling ramp soak.
-
Suitable for glass or ceramics use.
-
Soak times up to nearly 100 hours.
-
Ramp rates from 1 to 999°C/hour full.
-
Program Pause & Segment Advance facilities.
-
Can be held remotely, allowing for an easy and comfortable programming process.
-
Keyboard lockable.
-
Delayed start facility - up to 4 days.
-
Power failure recovery.
-
Energy used display.
-
Event / Damper / Fan relay output.
-
Alarm relay with alarm buzzer.
-
Mains power switch.
-
Built in the United Kingdom.
KCR32C WIFI Controller (included as standard with TLA range)
​
The KCR32CWIFi is internally the same as the KCR32C but has the capability to be accessed
and controlled remotely from your mobile device.
This is one of the most important advances in Kilncare kilns for many years.
Using Kilncares GATEway access site you can view how your kiln is running in real time. Stop the
firing or adjust programs all without even being in the same country let alone the same room.
The KCR32WIFI is also fitted with a USB port that allows programs to be entered that way direct from PC if required and also allows us to apply updates and run diagnostics without travelling to your kiln.
Internet access to view real time status and access data
​
The optional KCR32C WIFI allows the user to access the kiln in real time from anywhere with internet access via the Kilncare GATEway on our website. The benefits of this are obvious as there is no longer the need to travel to the studio or work place to see how the firing is proceeding or if indeed the firing is going as planned.
Also in the GATEway, which is unique to each user via password access, there is a firings library where past firings can be stored and named, a notes section and a log amongst other features.
​
Wi-Fi capability
​
The KCR32C WIFI and ST535C WIFI allows the user to access the kiln in real time from anywhere with internet access via the Kilncare GATEway on our website. The benefits of this are obvious as there is no longer the need to travel to the studio or work place to see how the firing is proceeding or if indeed the firing is going as planned.
Also in the GATEway, which is unique to each user via password access, there is a firings library where past firings can be stored and named, a notes section and a log amongst other features.
​
Non ceramic fibre Lid
​
The lids are stainless steel and stack bonded with non ceramic fibre, a tried and tested technique that guarantees no fibre droppage onto your work. To top it off the lid opens near vertical providing unrestricted access for loading!
150mm (6") highly insulated walls
​
The walls are 150mm (6")" thick to ensure for both low thermal loss, and low case temperatures. This provides very smooth annealing for larger pieces and retains heat to help with lengthy casting cycles.
​Kanthal A1 elements
The TLA range, along with the vast majority of Kilncare kilns, utilises Kanthal A1 elements (which are widely regarded as the best quality elements available), ensuring unbeatable reliability and durability.
Gas Spring Lid Assist
​
Lifting the lid on an TLA is aided by specially designed gas springs that allow the opening and closing of lid to be a very easy and light operation.
This makes the kiln completely user friendly but also helps in prolonged life due to the reduction of shock through "heavy" opening and closing of the lid.
Vent/peep hole
​
On the front of the kilns is a large vent/peep hole, allowing for a view into the kiln to check how your firing is going, as well as extra ventilation for cooling the kiln quicker once the firing has completed.
Built to last
The case is made with angle iron and lines with stainless steel mesh. Panels are then fitted to give a finished appearance. The kiln frames are then powder coated and oven baked.
​Over-fire and door switch safety
Each TLA has of a door safety cut off switch along with a dual contactor door cut off circuit, which also acts as a dual contactor over fire protection circuit, making the kiln extremely safe.
Manually operated roof vents or optional automatic vents
​
The roof vent (2 on larger models) is operated by a manual stainless steel damper box, automatic dampers are optional, and can be fitted to all TLA kilns.
​
This allows the roof vents to opened and closed multiple times throughout the duration of the firing at the temperatures required.
The opening and closing cycle is programmed into the controller so enabling the user to start the kiln then not have to return to it for any action other than monitoring until the cycle is finished. Extremely useful on larger models where firings can last for many days or even weeks.
Optional lockable castors
The TLA range offers the optional extra of lockable swivel castors, allowing for vastly increased ease of movement.
3 Year Warranty
The TLA range comes with a 3 year warranty that applies for all parts (inc elements)! The fact that we are able to offer such a long warranty on these kilns just goes to show how well made they are and how they are truly built to last.
Made In The UK
The TLA range, along with all other Kilncare kilns, is made right here at Kilncare, in Stoke-on-Trent, United Kingdom.
Unrivalled aftercare
Here at Kilncare we really do pride ourselves on our customer service. We have a team of kiln experts at hand that will be there for you whenever you find yourself with any queries or worries who will do their absolute best to ensure that you can continue your glass journey as problem free as possible.
We really do go the extra mile when it comes to customer service, which you can see for yourself by taking a quick look at our online reviews.
TLA Range Instruction Manual
KCR32C Instruction
Manual
GATEway instructions